1. WoodRiver 180-Grit CBN Grinding Wheel, 8″x 1″ for Grinders with a 5/8″ Arbor
- Cubic Boron Nitride coated wheel
- Balanced – wheel machined from steel plate
- Never requires dressing
- Economical – CBN coating lasts for years under routine use –
- WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans.
2. Super Abrasive CBN 5-3/4” Chainsaw Wheels for ¼ and .325 Pitch Steel Chains
- Sharpens 1000’s of chains
- Preshaped and hold their shape, have an aluminum core to run cooler, create virtually no dust
- Perfect for both the professional chain sharpener and the weekend sharpener
- 5-3/4″ diameter (D) with a 7/8″ arbor hole (H), 1/8″ thick (T) for 1/4 and .325 pitch chains
- Fit the Oregon 511A, Maxx, Tecomec, Northern, Timber Tuff, Carlton, Speed Sharp, and other equivalent machines
3. Super Abrasive CBN 5-3/4” Chainsaw Wheels for 3/8 and .404 Pitch Steel Chains
- Sharpens 1000’s of chains
- Preshaped and hold their shape, have an aluminum core to run cooler, create virtually no dust
- Perfect for both the professional chain sharpener and the weekend sharpener
- 5.75″ diameter (D) with a 7/8″ arbor hole (H), 3/16″ thick (T) for 3/8 and .404 pitch chains
- Fit the Oregon 511A, Maxx, Tecomec, Northern, Timber Tuff, Carlton, Speed Sharp, and other equivalent machines
4. VMTW 8X1 inch CBN Grinding Wheel 180 Grit Sharpen High Speed Steel Cutting Tools
- Precision Made Solid Aluminum body 8″ dia by 1″ with CBN on the face and 1/4″ sides of the wheel. For 5/8 inch shaft.
- Designed for use with slow speed 8 inch bench type grinders; 1800 RPM or 3600RPM
- Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig. Now includes two precision ground, parallel surface washers.
- Use with High Speed Steel (HSS)Tools Only
- Note: These wheels are made with very tight tolerences. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as percise, and may be slightly larger then .625 inch. This will cause an interference fit. A little bit of emery cloth on the shaft will help get the wheel on.
5. Savannah 80 Grit 8″ x 1½” Steel CBN Grinding Wheel with a 5/8″ Bore and a 3 Piece Spherical Washer Set
- If you have ever used a traditional aluminum oxide grinding wheel, then you know that it takes a bit of consistent maintenance to keep the wheel flat and true. We typically would use a wheel dresser to do this. Using a CBN wheel eliminates this chore by staying flat and true for its entire life span. CBN wheels simply just don’t wear and provide years of sharpening service! No more dressing or shaping of your wheels. Just turn the grinder on and get to sharpening!
- The Savannah 8″ CBN Grinding Wheel is machined from solid steel and is bonded with Cubic Boron Nitride (CBN). Use the CBN wheels for most any sharpening projects, including; turning tools, chisels, plane irons and more. With the Savannah 8″ CBN Grinding Wheels you will achieve a super fine, sharp edge with polished bevels on either hardened tool steel or carbide.
- Each wheel is approximately 8” in diameter with a standard 5/8” bore opening which fits most standard size arbors. The Savannah 8” CBN Grinding Wheel is designed to be use with 8” grinders only. The flat sharpening surface is approximately 1 ½” wide. This provides you with plenty of sharpening surface for most any size tool.
- Some grinders will create a little vibration in the wheel due to seating problems against the the shaft shoulder near the motor housing and sometimes this happens because of unequal pressure from the shaft nut. This vibration will interfere with the accuracy of sharpening. We have found If you experience this problem the included self-aligning Spherical Washers will do the trick of eliminating any vibration at all for a much smoother sharpening experience.
- Our CBN wheels are made using a heavy industrial electroplate method to embed Cubic Boron Nitride particles into a precision machined steel blank. Each wheel weighs about 6 pounds. We recommend using a slow speed grinder (1750 to 2000 rpm) with sufficient amperage to handle the extra weight. These wheels are designed to be used to sharpen hardened Steel or Carbide metal tools. Using the CBN wheel to sharpen non-heat treated steel, aluminum or other soft metals will damage the CBN Grinding Wheel
6. WoodRiver 180-Grit CBN Grinding Wheel, 6″x 3/4″ for Grinders with a 1/2″ Arbor
- Cubic Boron Nitride coated wheel
- Balanced – wheel machined from steel plate
- Never requires dressing
- Economical – CBN coating lasts for years under routine use –
- WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans.
7. Hurricane Turning Tools, 8″ CBN Grinding Wheel, 80 Grit, 1.0″ Wide, 5/8″ Bore, for Sharpening High Speed Steel Tools
- Series II wheels are made from an aluminum core, which is lighter in weight than steel and will run smoother on all grinders
- Ideal for sharpening woodturning tools (High Speed Steel only)
- Designed for use with bench type grinders; 1800 RPM (Preferred) or 3600 RPM
- Wheel diameter does not change over time; CBN material is on the face and sides (1/4″) of the wheel
- Balanced in the manufacturing process and never need “Truing” or “Dressing”
8. Woodcut Tools Tru-Grind 6″ CBN Grinding Wheel, 180 Grit, 1.0″ Wide, 1/2″ Bore, for Sharpening High Speed Steel Woodturning Tools 150x25x180
- NO WEAR – CBN wheels retain their shape and size so no resetting of your jigs.
- FINE AND EVEN FINISH TO WOODTURNING TOOLS – 180 grit gives a fine and even finish to your tools with only light pressure required.
- NO BURNT OR BLUE EDGES – Cool cutting provides no burnt or blue edges with a smooth grinding experience from 100 to 3500 RPM.
- NO DRESSING OR CONDITIONING REQUIRED – A CBN wheel is designed for sharpening high speed steels and will withstand the friction from grinding with much less heat produced than a diamond wheel.
- OUR MONEY BACK GUARANTEE – We consistently get feedback from customers who have found the quality and performance of our products have exceeded expectations, but in case you don’t agree, we offer a no questions asked 30 Day Money Back Guarantee. Give our Tru-Grind CBN Wheel a go today, absolutely risk free!
9. Grit 600 Kent 6″ Diam x 1″ Width Diamond Lapidary Jewelry Grinding Wheel
- Kent Diamond Lapidary Jewelry Grinding Wheel
- 6 inch Diameter
- Width: 1 inch (25mm)
- Arbor Hole: 25mm (1 inch), includes 3 reducers sizes 19mm (3/4 inch), 16mm (5/8 inch) and 13mm (1/2 inch)
- GRIT 600 AAA Premium Quality Diamond
10. SCOTTCHEN CBN Grinding Wheel 6” x 1″ Wide x 1″ Arbor (with 1″ to 5/8″ Bushing) Grit# 80 for Sharpening High-Speed Steel (HSS) Tools with Aluminum Reducing Bushing Adaptor – 1Pack
- 【Function】The 6″ CBN grinding wheel ideal for sharpening High-Speed Steel (HSS) wood turning tools, cannot be used for carbon steel / tungsten steel sharpening.
- 【Special Design】The CBN grinding wheel provide 1” wide flat grinding surface, highly improve work efficiency. The side 5/16” grinding edge provides more sanding function. The 1″ to 5/8″ reducing bushing allows it fit for both 1” and 5/8” grinder.
- 【Advantage】The steel CBN grinding wheel is more flat and 30% more sharp than ordinary diamond grinding wheels, well balanced in the manufacturing process and never need “truing” or “dressing”.
- 【Material】The grinding wheel is made of durable steel base with CBN plating, provide long service life. The Aluminum arbor reducing bushing runs more smoothly on all grinders, much better than plastic one.
- 【Dimensions】Dia x Wide x Arbor: 6” x 1″ x 1″; Arbor bushing adaptor: 1″ to 5/8″.
Leave a Reply